Two-Component Reactive System
Diisopropyl Carbonate, also known as tetraisopropyl titanate or titanium isopropoxide, has CAS No. 546-68-9. It is supplied as a colorless transparent liquid with purity of at least 99.5%. The actual purity of each production batch is confirmed through the corresponding COA. The product is positioned as an industrial-grade material for chemical reaction and polymer processing.

Cured Film Characteristics
The product offers high solid content and initial tack, alongside good coating workability. The cured film is tough with high peel strength and stability. The resulting laminates are reported to show resistance to acid, oil, and aging. The system dries quickly, leaves minimal residual solvent, and forms a transparent, odorless film that meets food packaging hygiene requirements. It also withstands boiling for up to half an hour.
Application and Processing Guidelines
Film surfaces must be clean, flat, and free of dust, oil, or oxidation layers. For polyethylene and polypropylene, corona treatment is necessary to achieve a surface tension above 38 dynes. Immediate lamination after treatment yields the highest peel strength.
Mix the main agent and curing agent at a 5:1 ratio. Ethyl acetate is the preferred diluent, with a water content below 300ppm and alcohol content below 200ppm. The recommended working concentration is 20% to 28%. During lamination, adjust the dry coating weight between 2.5 to 4.5 g/m². Increase the amount for printed surfaces, metallized layers, or products requiring boiling resistance or content resistance.
Curing requires 24 to 48 hours in a chamber at 50-60°C. For room temperature curing, allow 4 to 7 days. Prepared adhesive must be used within the same day; discard any mixture that turns cloudy or thickens. Keep the workplace free of open flames, as this polyurethane laminating adhesive is flammable.
Packaging and Storage
The main agent (JSD-1050A) is supplied in 20kg drums. The curing agent (JSD-1050B) is packed in cartons containing four 4kg cans (16kg total). Both components have a 1-year shelf life. Store them sealed in a cool, dry place away from direct sunlight. The curing agent is moisture-sensitive and requires dry conditions.
Product Specifications
|
Parameter |
Specification |
|
Main Agent Appearance |
Light yellow transparent liquid |
|
Curing Agent Appearance |
Light yellow transparent liquid |
|
Viscosity (Main Agent / Curing Agent) |
500-1500 / 20-40 mPa·S at 25℃ |
|
Solid Content |
50 ± 2% |
|
Mixing Ratio |
5:1 (Main Agent : Curing Agent) |
FAQ
Q: Can prepared adhesive left over from the day still be used?
A: Prepared adhesive must be used within the same day. If excess remains, dilute it several times with solvent, seal it, and store it in a cool place. It can then be added as a minor component to newly prepared adhesive. Do not use the mixture if it has turned cloudy or thickened.
Q: How long does the curing process take before subsequent processing?
A: After lamination, place the composite product in a curing chamber at 50-60°C for 24 to 48 hours. For room temperature curing, allow 4 to 7 days. Subsequent slitting or bag-making processes can proceed after curing is complete.
Sourcing Information
Jiaxing Xiaolan Import and Export Co., Ltd. supplies this two-component system. Samples are available for evaluation prior to bulk orders. Standard shipping terms such as EXW, FOB, CIF, and DDP are supported, with standard payment terms of 30% deposit and 70% before shipment.
Hot Tags: polyurethane laminating adhesive, China polyurethane laminating adhesive manufacturers, suppliers, factory, 2 Ethylhexanol, chemical raw materials, Diisopropyl Carbonate, Pta Terephthalic Acid, Tetrabutyl Titanate, Trimellitic Anhydride











